25 thoughts on “FRESNEL SOLAR STIRLING ENGINE SUN POWER ALTERNATIVE ENERGY STIRLING MOTOR GENERATOR

  1. divinenuker

    @JacobH420 The working fluid is just hot air inside the cylinder of the piston assembly. The fresnel lens concentrates solar energy on a focal point on the aluminum cylinder encased with the metal casing. Once the initial rotation is applied on the fly wheel. The piston compresses the hot air and then the whole reciprocating piston motion starts. So to answer your question it doesn't need a air fuel mixture. Just air is fine.

  2. simonsaladcream

    @AndryhaCh A small trickle of water onto linen around the cold end of the cylinder would provide evaporative cooling without the need to compress the freon in a vapour cycle system. Solar power meets water power!

  3. bjeanfreau

    What is the bottom line? Given the area of the fresnel lens.....can you generate more watts from it using a mechanical to electrical system vs the most efficient solar cell? Then there is the cost...Can you get more watts per dollar than an efficient solar cell than you can using a sterling or steam driven generator?

  4. urgencyharviefcem

    Free energy can change the world!But Millions are spend in supressing that information,Find this technology at LT-MAGNET-MOTORdotCOM ,Join the revolution!

  5. AndryhaCh

    If to a flywheel to attach the refrigerating compressor then it will be possible to raise EFFICIENCY strongly. The evaporator on a cold part, and the condenser on the hot.

  6. AndryhaCh

    If to a flywheel to attach the refrigerating compressor then it will be possible to raise EFFICIENCY strongly. The evaporator on a cold part, and the condenser on the hot.

  7. checksummedchest

    Free Energy is real and its here! The Oil companies are doing everything they can to stop this

    information. If you want a Free energy machine , get the blueprints at LT-MAGNET-MOTORdotCOM , Join the

    revolution!

  8. newton2013

    Next evening, got another. They aren't as nice as new ones, one is a bit yellowed. I'm wondering if that "3m headlight restore" product would work. "Four step process that restores the clarity of yellowed, hazed, or dull headlight lenses."

  9. dreadfulweasel

    I think the Fresnel lens is the real star of this show. Could that type of lens have photovoltaic or steam turbine applications?

  10. renegade2787

    Is it possible to just modify the flywheel to where you can set up a magneto from a small engine(i.e. lawnmower, etc.) to produce electricity? Might take away a bit of the drag you get from attaching a generator to it.

  11. kenboak

    The function of the displacer is to transfer the air from the hot space to the cold space. This sets up internal pressure cycle variations, which in turn drives the power piston in and out. A mechanical linkage links the power piston to the displacer and drives it at 90 degrees phase advance. Neat little solar engine - with a water cooled cold space and a glass jar (greenhouse) around the hotspace - it would really run well.

Comments are closed.