FREE ENERGY # 35 BI-TOROID TRANSFORMER – 377 % OVER UNITY MOTIONLESS
FREE ENERGY # 35 BI-TOROID TRANSFORMER - 377 % OVER UNITY This idea developed by Thane C. Heins. Thane has developed, tested and patented a transformer arrangement where the output power of his prototype is thirty times greater than the input power. He achieves this by using a figure-of-eight double toroid transformer core. His Canadian patent CA2594905 is titled "Bi-Toroid Transformer" and dated 18th January 2009. The abstract says: The invention provides a means of increasing transformer efficiency above 100%. The transformer consists of a single primary coil and two secondary coils. The two secondary coils are set on a secondary toroidal core which is designed to be maintained at a lower magnetic resistance than the primary toroidal core throughout the entire operating range of the transformer. Thus, when the transformer secondary delivers current to a load, the resulting Back-EMF is not allowed to flow back to the primary due to the higher magnetic resistance of that flux path, instead, the secondary coil's Back-EMF follows the path of least magnetic resistance into the adjacent secondary coil. This prototype, as you can see, is fairly simple construction, and yet given an input power of 106.9 milliwatts, it produces an output power of 403.3 milliwatts, which is 3.77 times greater.(377 % over unity by the prototype test) This is something which needs to be considered carefully. Conventional science say that "there is no such thing as a free meal" and with any ...
Incoming search terms for the article:
- forum overunity cheats free energy
- free energy transformer
- free toroid electricity
- ferro-resonant over unity coils
- bi torroid generator
- torroid transformer generator
- thanes transformer
- Thane Heins BI-TOROID TRANSFORMER pdf
- overunity zpe magnet 2012
- overunity energy
This is sooooo cool! Why does he not have a patent for this?
Great explanation and diagrams! I understood everything with the first viewing! Awesome transformer!
As you might know from my channel, i've a Ph.D. & electronics engineer explaining my previous analysis that you do not get overunity for the moment with your setup.
I'm also a yogi, healer explaining why I experience pyschokinesis effect near ZPE devices so I also confirm that upon telepathically scanning your video, it does not produce scalar waves required to shift overunity.
About the 4 holes topology which is correct, I suggest your for transverter approach of my friend Hector Torres.
To measure COP of any ZPE devices is really tricky and can never be done with standard multimeter but requires special devices or digital signal processing techniques.
The physical topology of your ferro-resonant ZPE reactor is correct but as shown in your video, it is not producing overunity. You need to tune via special PWM frequency pulsing and voltage saturation in order to bring ferro-resonance.
I think you have a problem measuring input power with enough accuracy. Measuring 3mA AC current with a 3-3/4 meter on 4A range is ridiculous - tolerance for most meters falls in rango of +/- 3-5 counts, meaning it could be 0 to 7mA of current.
More on the topic - no matter how you fold the flux, it'll find a way to balance itself out. No overunity here, or ever.
What a messy experiment
So you claim overunity but where? How do you know the BEMF is flowing down the path away from the primary? So if it is overunity then things will continue to run as a closed circuit whey you remove the source. Not possible!
OK Cool but what is the gauge wire and how many windings
Thanks Thane..we're getting there!
(OK, you're getting there, but you know what i mean)
You have the patent, are you now planning manufacturing and marketing?
You say that the output power equals 403.3mW and that the voltage across the secondary windings equals 3.3V but nowhere in the video do you measure the current through the secondary windings. If You Are truly producing 403.3mW output power compared to 106.9mW input power then you should be able to measure 112.21mA through the secondary windings.
Please demonstrate this measurement of 112.21mA through the secondary windings.
Your load resistor is wire wound and it has inductance replaced it with carbon resistors or metal film resistors and repeat your test.
super genius! want one of those
Brilliant!
He said that it acts as a magnetic diode... I want if that in itself could be apply to making a purely magnetic motor?